In order to perform TP-link WiFi extender setup with ease, it is important for you to connect your extender and router in a proper manner. However, 4 out of 5 TP link extender users fail to do so. If you are also one of them, then let us tell you that this issue isn’t something to stress over. In this article, you will get to know everything about how to fix “TP-Link WiFi extender not connecting to router” issue in a hassle-free manner. So, without much ado, let’s start over!
Know how to fix TP-Link extender not connecting to router issue
Fix 1: The very first thing that you have to do in order to fix the issue is to place your TP-link WiFi extender and your router in close proximity. If possible, place your devices in the same room. Avoid placing your devices near the reach of your neighboring WiFi. Besides, to revamp your internet experience – do not place your router inside a cabinet. The live and active WiFi signals coming out from your main router are very important for your TP-link WiFi extender to perform well. Besides, your extender and router must be placed on a higher and cool location in your home.
Once you’re done, check whether your devices are connected in a successful manner or not by accessing the TP link WiFi extender login page.
Fix 2: How you have connected your TP-link extender and router? Have you connected them wirelessly? Well, it’s ok! But, connecting the devices wirelessly may not work in most cases. So, to make a solid connection between your extender and router, connect them using an Ethernet cable. But, make sure to use a well working Ethernet cable. And, if you want to connect your devices using a wireless source only, then ensure to connect your extender to your home WiFi only. Chances are that you can get connected to an unknown network accidentally and that is giving you issue. So, verify the same before connecting your TP-link device wirelessly to the router.
Fix 3: Configure your TP-link extender properly so that you can get the most out of your device. Wondering how to perform TP-link WiFi extender setup? Wonder no more! Refer to your device’s manual or drop us a line into the comments section.
Set up your device and get a permanent fix to troubleshoot TP-link extender not connecting to router issue.
Fix 4: Still facing the same issue even after following the aforementioned fixes? Need not to worry! The last tip that you are left with is to reset your TP-link WiFi extender. Before you reset your TP-link extender, we want you to be aware of the fact that the extender factory reset erases all the personalized information and data on your WiFi device, such username, password, security settings, configuration process, etc. So, we recommend you – take the backup of all the customized settings of your TP-link extender prior to resetting it.
Now, to reset your TP-link WiFi range extender, follow the steps highlighted below:
- Keep your range extender plugged in. Do not unplug it from the wall outlet.
- Don’t forget to disconnect the TP-link extender from your router and other WiFi devices.
- Once you’re done, locate the reset hole on your TP-link WiFi extender.
- Once found, press it gently and hold it for some time.
- Release the TP-link extender reset hole.
- Allow the device to reboot.
Kudos! Your TP-link WiFi range extender resets successfully. Now, you can access the TP-link WiFi extender login page or the TP link extender app (if installed) and follow the on-screen instructions to configure your device with great ease.
Facing TP-Link WiFi range extender not connecting to router issue is quite common. But, if you follow and apply the fixes mentioned in this article correctly, you will surely able to cope up with the issue in a fly. In the event that you got stuck at any point, feel free to lay all your queries on us via comments.
Keywords: tp link wifi extender login, tp-link wifi extender setup, tp link extender app