In case your internet connection is not up to the mark because of the Netgear extender not connecting to the router issue, then you have landed on the right article in the search for a solution. Here, you will come across every technique through which you will be able to connect the networking devices without facing any issues and access mywifiext. In case you do not believe us, read the information given below and see for yourself.
[Fixed] Netgear Extender Not Connecting to Router Issue
1. Replace the Wireless Source
The primary reason why you are a victim of the Netgear extender not connecting to the router issue is that you made the mistake of using a wireless source of connection to connect the networking devices, i.e. the extender and the host router.
You should know that there is nothing wrong with using a wireless medium, but can you rely on it properly? The answer to that question is a big no. Taking this into consideration, you should not use this source of connection.
Instead, you ought to make use of a cable to connect the devices. A couple of points should be considered while you are doing so. Number one, the ports located on the devices should not be damaged and the distance between the devices should not be too much.
Why? Well, because too much distance can create friction. It can stop the signals emitted from your networking devices to not get transmitted evenly throughout your house. If you do not want this to happen, then do as suggested.
2. Get Rid of a Damaged Cable
Another reason why the Netgear extender not connecting to the router issue is behind your back is because your Ethernet cable connecting the networking devices is damaged. This situation applies only to those users who have used a cable.
To get rid of the issue at hand, you need to change the cable to a new one. Make sure that the new cable has no cuts on it. Along with this, the connection which you are establishing should be finger-tight.
Leaving the connection loose will only cause issues for you in the future. Wondering how that will happen? Well, if the connection is loose, then the extender will not be able to extend the signals of the router thereby creating a communication gap.
In case, you have understood what we are trying to say, then implement this tip right away. As soon as you are done with the same, see if you are experiencing the Netgear extender not connecting to the router issue. In case, you are, follow the last tip.
3. Reset the Netgear Extender
Resetting or restoring the Netgear wireless range extender is the last resort that we suggest to people when nothing seems to work for them. Taking this into account, you should reset the Netgear extender without wasting any more time.
To execute the process, you need to locate the Reset button on the extender. Once found, press it carefully with the help of an oil pin or a paper clip. Make sure that you wait for a minimum of 5 minutes, no less than that.
Once you are done resetting your networking device, it is recommended that you set it up from scratch. The same can be done if you make your client device access the network name of the Netgear wireless range extender.
For your information, the default SSID of your extender is Netgear_ext. In case you want to know more about the same, then you should refer to the information given in the user manual of your networking device.
Final Note
As mentioned in the introduction of this article, troubleshooting the Netgear extender not connecting to the router issue is not that difficult. However, many users experience this issue and get afraid when it comes to resolving it. Considering you are one of them, we hope that the aforementioned tips help you to connect the wireless range extender to the host router. In case, they did, do share your feedback.
You can share your feedback with your fellow readers by making use of the comment section. Just enter what you want, and press the Enter key. In some time, your comment will become visible to the world.
Comments are closed, but trackbacks and pingbacks are open.