cut wood slices

How to cut wood slices with chainsaw

If you haven’t used a chainsaw before, be sure to take the time to learn how to use it properly. A chainsaw can be used for many things like trimming, pruning, cutting down trees or branches. Since the process of taking a tree trunk and slicing it with a chainsaw is one that you’ll want to know very well before undertaking, here’s how it’s done!

Things like chainsaws can be dangerous or helpful, depending on how they are used. A chainsaw’s blade can cut through a log as easily as it could cut off a finger. It just depends on whether or not you’re using the tool responsibly and with safety in mind by following all of its proper usage instructions and guidelines. However, don’t let that stop you from getting up close and personal with all the most useful chainsaw hacks! Because if you follow them, then it’s guaranteed that you will be able to handle your saw safely at all times.

How to cut wood slices with chainsaw

When chipping away at a tree trunk, you can use one of several methods, including: 

1) supporting the log on both ends

 2) over bucking 

3) using wedges 

No matter what strategy you use, make sure that whatever you’re chipping doesn’t fall off and onto someone’s foot!

Though there are many different techniques to obtaining a high-quality finish on a piece of wood, the first step is to make sure you’re using your tools (or blade) effectively.

Choose the right size of chainsaw

There are two smart sizes of chainsaw that are standard for cutting trees into wood slices. One is 16 inches, and another is 18inch chainsaws. Both of them are long enough to complete your task successfully. If you already have any of them, that’s great. If you don’t, we will recommend you buy one of good quality. You should also consider the type of chainsaw that’s the right fit for you; if you are a leftie, you can select left handed chainsaw. Otherwise, you can pick a normal chainsaw.

Wear Safety Equipments

Using a chainsaw for cutting woods is dangerous and risky. There are certain precautions that must be taken before working with an electric saw. For example, wearing protective attire such as ponchos and goggles with the chainsaw helps prevent bodily harm caused by a kickback or cutter. If one is not taking precautions, a person exposes himself to the severe danger of getting hurt. It’s better to follow certain rules rather than hurt oneself while using the saw.

Procedure: How to cut wood slices with chainsaw

Step 1:

Stand the tree log upright and push it upright so that it is approximately five or six inches away from the ground. You will now have a better angle at which to start cutting at this elevated height position. As your chainsaw cannot reach the ground, there’s no chance of an unwanted kickback because instead of coming into contact with the surface, only your saw will be exposed. To prevent getting burnt by sparks, lubricating oil, or excess heat, it’s important to keep your feet protected underneath heavy work trousers (insulated overalls) as well as a face shield (or otherwise called “safety glasses”). You can also use a log jack to get the desired angle and distance your log needs to start working properly. Alternatively, you can also employ another suitable piece of wood as an improvised prop!

Step 2:

Before you can start cutting, one must always be sure to take the time to take measurements with a measuring tape and mark where they need to cut. Measuring is always key when making cuts because it’s important to know what length of wood you’re going to make so as not to waste any material.

One should generally measure out big logs or trees with a measuring tape before cutting them out into sections; this helps them see how much wood they will have leftover afterward and even gives them a rough idea about the amount of material, in addition to being able to also judge whether or not these particular side cuts of wood will work for building things like flat platform, pedestal legs or interesting rustic tabletops. It’s often safer not to split a log if it’s too large so that the act of splitting them doesn’t accidentally cause chunks to fly off that might injure someone during the process.

Step 3:

It is important to check the condition of your chainsaw well before you start cutting. If the fuel is enough for completing the task, that’s good. It will be a waste of time and money if you have to stop in the middle to refuel it! Now, make a warm-up cut on a small piece of wood by holding your saw vertically to test the condition of your equipment. Check if it works smoothly and gives clean cuts without any risk of kickback.

Don’t be a Screamer. If something needs to get cut, point it in the right direction, and rev it up. Don’t fight with the saw; just guide it properly, and this will give you cleaner, smoother cuts than forcing it. The noise of the chainsaw might bother you for a moment or two but ignore it. Complete the cutting with full concentration. If you need to push the saw more than before, invest in a professional-grade chainsaw sharpener if your saw is dull and work again.

Step 4:

Once a cut log is completed, the wood must be moved to the side and set up for the next wood slice to be taken. Once this is complete, the next mark will be given on that log with specific measurements. This process repeats until all of the logs have been cut down.

Conclusion

Take the time to read our article on cutting wood slices before attempting the task yourself. We tried to describe the top and simplest method using our working knowledge with wood. We would highly recommend that you take all necessary precautions when working with a blade to avoid unwanted accidents. For example, one of many things that could potentially happen is an injury resulting from losing focus while cutting against a vertical surface.

Comments are closed, but trackbacks and pingbacks are open.